I've tried installing via downloading the `.deb` and also via adding the `multiverse`? PPA and now neither works.

Adding the `multiverse` PPA has given me a ton of warnings on `apt-get update` now:

[pre]W: Skipping acquire of configured file 'multiverse/binary-amd64/Packages' as repository 'http://archive.canonical.com/ubuntu jammy InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'multiverse/binary-i386/Packages' as repository 'http://archive.canonical.com/ubuntu jammy InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'multiverse/i18n/Translation-en_US' as repository 'http://archive.canonical.com/ubuntu jammy InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'multiverse/i18n/Translation-en' as repository 'http://archive.canonical.com/ubuntu jammy InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)
W: Skipping acquire of configured file 'multiverse/cnf/Commands-amd64' as repository 'http://archive.canonical.com/ubuntu jammy InRelease' doesn't have the component 'multiverse' (component misspelt in sources.list?)[/pre]


The `.deb` fails to install and the `Package Install` window doesn't support copy/pasting. But if I run `steam` via the terminal I get:
[pre]Package libegl1:i386 needs to be installed
Package libgbm1:i386 needs to be installed
Package libgl1-mesa-dri:i386 needs to be installed
Package libgl1:i386 needs to be installed
Package steam-libs-amd64:amd64 needs to be installed
Package steam-libs-i386:i386 needs to be installed
Package xdg-desktop-portal needs to be installed
Package xdg-desktop-portal-gtk needs to be installed[/pre]



And finally errors with:
[pre]steam.sh[9574]: Error: You are missing the following 32-bit libraries, and Steam may not run:
libGL.so.1
libdrm.so.2
libdrm.so.2
libdrm.so.2[/pre]

EDIT1: I followed the guide at https://techpiezo.com/linux/install-stea...ntu-22-04/ and installed a ton of stuff via [pre]sudo apt install libgl1:i386[/pre] and now steam launches but it still complains about missing packages. The missing packages now are:

[pre]Package libegl1:i386 needs to be installed
Package libgbm1:i386 needs to be installed
Package steam-libs-amd64:amd64 needs to be installed
Package steam-libs-i386:i386 needs to be installed
Package xdg-desktop-portal needs to be installed
Package xdg-desktop-portal-gtk needs to be installed[/pre]

Hi
      After many years of using the outstanding Linux Lite i have come across a problem i cannot seem to solve..
After many hours of researching and trying solutions ....  Problem still not solved..

Got a new Lenovo laptop put Linux Lite 6 on it....  It worked perfectly apart from the touchpad did not work but a plugged in mouse did work... I even tried a copy of 5.6 but still no touchpad..

Computer details...
Lenovo IdeaPad-3-15IIL05
Kernel  Linux 5.18.0 (x86_64)
Processor  Intel® Core™ i5-1035G1 CPU @ 1.00GHz
Memory  7693MB
I wound be very grateful of a solution to this problem..
Want any more details .....  Please ask..
Kind Regards
Carl

There is another post on the same topic.  The prompt on that page suggested a new thread as the old one has gone 120 days with no comment.

I am trying to connect LL 5.8 to an HP Deskjet 4155e as a wireless network printer.  I have downloaded the HP software.  I have tried the installation instructions in the manual.  I have connected the printer to my laptop via USB. Regardless of the method I attempt, the answer is always <there was an error during the CUPS operation server error internal error>. 

Printer setup shows that is sees the printer.  5 attempts at printing a test page have resulted in document being held.

How can I accomplish this task? 

FWIW, Linux in general has shown me that I am truly a semi-technophobe.

I did not expect this issue.  I have been using Ubuntu MATE for 3 years and it recognized this printer with no problem. 

I have really enjoyed trying Linux Lite again - second time around.  I would like to use it as my primary OS.  I need to be able to print.

Brother printer MFC-J870DW will not scan. Please advise.

Hello,


I recently had an issue with a program and the bash welcome message.
With a VScode extension which configure things by running a bash command and fetching the first few lines. This extension didn't work for me until I commented out the bashrc welcome message.

Maybe the extension is using the wrong method.
But I wanted to know if there were alternatives to display the welcome message? How does Ubuntu for example? Is there a conventional argument to indicate whether or not to display the message?


Best regards,
Romain.

Hi, i'm trying to install italian language support.
I already set all like screen below, "apply system wide" also and "regional formats" tab, but nothing change.
Linux lite 3.8 (the last at 32bit for my old netbook).

What can i do?

 

Hi all, just now i've installed linux lite 3.8 (the last at 32bit) on my old Asus eeePC (Intel Atom, 1 GB RAM), but sound not working.
What can i do?

Thanks

Hello linuxlite community  how do you install making music software on linux lite OS for freedom software foundation compliant though. please tell me anyone what do i install. it can mix electronic music though.

Hi
      After many years of using the outstanding Linux Lite i have come across a problem i cannot seem to solve..
After many hours of researching and trying solutions ....  Problem still not solved..

Got a new Lenovo laptop put Linux Lite 6 on it....  It worked perfectly apart from the touchpad did not work but a plugged in mouse did work... I even tried a copy of 5.6 but still no touchpad..

Computer details...
Lenovo IdeaPad-3-15IIL05
Kernel Linux 5.18.0 (x86_64)
Processor Intel® Core™ i5-1035G1 CPU @ 1.00GHz
Memory 7693MB
I wound be very grateful of a solution to this problem..
Want any more details .....  PLease ask..
Kind Regards
Carl

How do I fix? To update to 6.0 (and do general app/system updates)

===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.868212.xyz/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Hit:1 http://us.archive.ubuntu.com/ubuntu focal InRelease
Hit:2 http://us.archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:3 http://us.archive.ubuntu.com/ubuntu focal-backports InRelease
Hit:4 http://security.ubuntu.com/ubuntu focal-security InRelease
Hit:5 http://repo.linuxliteos.com/linuxlite emerald InRelease
Hit:6 https://brave-browser-apt-release.s3.brave.com stable InRelease
Hit:7 http://archive.canonical.com/ubuntu focal InRelease
Hit:8 http://ppa.launchpad.net/appimagelaunche...ble/ubuntu focal InRelease
Ign:9 https://gitlab.com/paulcarroty/vscodium-...repos/debs vscodium InRelease
Err:10 https://gitlab.com/paulcarroty/vscodium-...repos/debs vscodium Release
  404  Not Found [IP: 2606:4700:90:0:f22e:fbec:5bed:a9b9 443]
Reading package lists...
E: The repository 'https://gitlab.com/paulcarroty/vscodium-deb-rpm-repo/raw/repos/debs vscodium Release' does not have a Release file.