Hello,

Have come across what I think is a bug in Linux Lite or one of its components.  Have done some bug hunting and come to the following conclusions:

I am using Oracle VirtualBox

The VM is configured as follows:

Hardware
OS: 64Bit Ubuntu
Ram: 4gb
Hdd: 10gb
Network: NAT Network with CIDR 192.168.1.0/24
Everything Else: Default

Linux Lite Configuration

Latest Version 64bit
Fully Updated
Webmin
openssh-server
Samba shared folder which is accessible from my other VM's(Ubuntu Mate)

Where is the Bug

The bug is in Network Connections

Network Settings

I have two connections, one for Internal traffic between the VM's and one for external traffic to the internet

INTERNAL
IP: Static: 192.168.1.20/24 no Default Gateway or DNS Servers
Other Settings: Connect Automatically with Priority - On

One for External

EXTERNAL
IP: DHCP
Other Settings: Connect Automatically with Priority - Off

The Problem

When these changes are made, the setting are saved.  However, whenever the VM is restarted either properly or improperly, Linux Lite will connect automatically to the DHCP connection(EXTERNAL).  If no DHCP enabled connection exists it will create one under the name of the Ethernet card, in my case: enp0s3 with DHCP settings and connect to it instead of the static IP connection(INTERNAL).  If the connection is set to DHCP and a static IP is added the same occurs

Originally I though it might be connecting alphabetically.  It wasn't.  I then tried removing and adding the connections in a different order, still didn't work.

Replicating the Problem

Problem can be replicated

Other Distros

The other two VM's on my VNet are Ubuntu Mate with identical Network configurations and Hardware Specs and Do Not have this issue

Machine 1

INTERNAL
IP: Static: 192.168.1.10/24 no Default Gateway or DNS Servers
Other Settings: Connect Automatically with Priority - On

One for External

EXTERNAL
IP: DHCP
Other Settings: Connect Automatically with Priority - Off

Machine 2


INTERNAL
IP: Static: 192.168.1.30/24 no Default Gateway or DNS Servers
Other Settings: Connect Automatically with Priority - On

One for External

EXTERNAL
IP: DHCP
Other Settings: Connect Automatically with Priority - Off

Other Than That
Came across Linux Lite a few days ago looking for a Guest OS for VM's for projects.  Clean, fast, small download, small install, easy to configure.  Probably going to become my default Linux OS on VM's

A while ago, i erased everything on my hard drive then I installed Linux Lite, is it possible to shrink volume and create new simple volume in Linux Lite?

Same Here, Please Help
===========================
Install Updates Error log
===========================
Install Updates could not successfully download and install available updates.
Go to https://www.868212.xyz/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages were automatically installed and are no longer required:
  linux-headers-5.4.0-92 linux-headers-5.4.0-92-generic linux-headers-5.4.0-94
  linux-headers-5.4.0-94-generic linux-headers-5.4.0-96
  linux-headers-5.4.0-96-generic linux-headers-5.4.0-99
  linux-headers-5.4.0-99-generic linux-image-5.4.0-92-generic
  linux-image-5.4.0-94-generic linux-image-5.4.0-96-generic
  linux-image-5.4.0-99-generic linux-modules-5.4.0-92-generic
  linux-modules-5.4.0-94-generic linux-modules-5.4.0-96-generic
  linux-modules-5.4.0-99-generic linux-modules-extra-5.4.0-92-generic
  linux-modules-extra-5.4.0-94-generic linux-modules-extra-5.4.0-96-generic
  linux-modules-extra-5.4.0-99-generic
Use 'apt autoremove' to remove them.
The following NEW packages will be installed:
  libopengl0 linux-headers-5.4.0-105 linux-headers-5.4.0-105-generic
  linux-image-5.4.0-105-generic linux-modules-5.4.0-105-generic
  linux-modules-extra-5.4.0-105-generic
The following packages will be upgraded:
  alsa-ucm-conf bind9-dnsutils bind9-host bind9-libs command-not-found cpp-9
  dnsutils firefox fonts-opensymbol g++-9 gcc-9 gcc-9-base gir1.2-gtk-3.0
  gir1.2-javascriptcoregtk-4.0 gir1.2-polkit-1.0 gir1.2-webkit2-4.0
  gtk-update-icon-cache libasan5 libegl1 libegl1-mesa libgcc-9-dev libgl1
  libgl1:i386 libgl1-mesa-glx libgles2 libglvnd0 libglvnd0:i386 libglx0
  libglx0:i386 libjavascriptcoregtk-4.0-18 libjuh-java libjurt-java
  libnetplan0 libpolkit-agent-1-0 libpolkit-gobject-1-0 libpython3.8
  libpython3.8-dev libpython3.8-minimal libpython3.8-stdlib
  libreoffice-avmedia-backend-gstreamer libreoffice-base-core libreoffice-calc
  libreoffice-common libreoffice-core libreoffice-draw libreoffice-gnome
  libreoffice-gtk3 libreoffice-impress libreoffice-pdfimport
  libreoffice-style-colibre libreoffice-style-elementary
  libreoffice-style-galaxy libreoffice-style-tango libreoffice-writer
  libridl-java libssl1.1 libssl1.1:i386 libstdc++-9-dev libuno-cppu3
  libuno-cppuhelpergcc3-3 libuno-purpenvhelpergcc3-3 libuno-sal3
  libuno-salhelpergcc3-3 libunoloader-java libvkd3d-shader1
  libvkd3d-shader1:i386 libvkd3d1 libvkd3d1:i386 libwebkit2gtk-4.0-37
  libxatracker2 libxml2 libxml2:i386 linux-firmware linux-generic
  linux-headers-generic linux-image-generic mesa-va-drivers
  mesa-va-drivers:i386 mesa-vdpau-drivers mesa-vdpau-drivers:i386
  mesa-vulkan-drivers:i386 microsoft-edge-stable netplan.io openssl openvpn
  policykit-1 python3-commandnotfound python3.8 python3.8-dev
  python3.8-minimal thunderbird thunderbird-locale-en thunderbird-locale-en-gb
  thunderbird-locale-en-us tzdata uno-libs-private ure vkd3d-compiler
Preconfiguring packages ...
98 upgraded, 6 newly installed, 0 to remove and 0 not upgraded.
16 not fully installed or removed.
Need to get 0 B/613 MB of archives.
After this operation, 408 MB of additional disk space will be used.
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: dependency problems prevent processing triggers for libglib2.0-0:i386:
libglib2.0-0:i386 depends on libc6 (>= 2.28); however:
  Package libc6:i386 is not configured yet.

dpkg: error processing package libglib2.0-0:i386 (--configure):
dependency problems - leaving triggers unprocessed
dpkg: too many errors, stopping
Errors were encountered while processing:
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
libglib2.0-0:i386
Processing was halted because there were too many errors.
E: Sub-process /usr/bin/dpkg returned an error code (1)

Hello,
I am getting an error during updating.
If any of you all could shed some light on it
that would be great.
Thanks
Joe


===========================
Install Updates Error log
===========================
Install Updates could not fetch the package cache information lists.
Go to https://www.868212.xyz/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

Hit:1 https://dl.google.com/linux/chrome/deb stable InRelease
Hit:2 http://ppa.launchpad.net/deadsnakes/ppa/ubuntu focal InRelease
Hit:3 http://security.ubuntu.com/ubuntu focal-security InRelease
Hit:4 http://archive.canonical.com/ubuntu focal InRelease
Hit:5 http://repo.linuxliteos.com/linuxlite emerald InRelease
Hit:6 http://ppa.launchpad.net/kicad/kicad-6.0...ses/ubuntu focal InRelease
Hit:7 http://ppa.launchpad.net/mosquitto-dev/m...ppa/ubuntu focal InRelease
Hit:8 http://us.archive.ubuntu.com/ubuntu focal InRelease
Hit:9 http://us.archive.ubuntu.com/ubuntu focal-updates InRelease
Hit:10 http://us.archive.ubuntu.com/ubuntu focal-backports InRelease
Hit:11 http://packages.microsoft.com/repos/code stable InRelease
Traceback (most recent call last):
  File "/usr/lib/cnf-update-db", line 8, in <module>
    from CommandNotFound.db.creator import DbCreator
  File "/usr/lib/python3/dist-packages/CommandNotFound/db/creator.py", line 12, in <module>
    import apt_pkg
ModuleNotFoundError: No module named 'apt_pkg'
Reading package lists...
E: Problem executing scripts APT::Update:ost-Invoke-Success 'if /usr/bin/test -w /var/lib/command-not-found/ -a -e /usr/lib/cnf-update-db; then /usr/lib/cnf-update-db > /dev/null; fi'
E: Sub-process returned an error code

¡Hola a todos! ¡Espero la estén pasando bien con familiares y seres queridos!  :55:

[member=2]Jerry[/member] está trabajando es lo que será la próxima entrega de Linux Lite: Linux Lite 6! Y hasta ahora lo que muestra en este post https://www.868212.xyz/forums/on-to...u-feel-it/ la verdad es que luce genial!









Nuevas y rediseñadas diapositivas de instalación...







¡Manténganse en sintonía para estar al corriente de lo que se viene en el nuevo y próximo a llegar lanzamiento de la serie 6 de Linux Lite! :55:

Good evening, I have installed Linux Lite 5.8, on Acer laptop.
The problem I have, is with the HP Deskjet 3720 printer I cannot print.
I followed the instructions to install HPLIP 3.22.2 from HP site.
The installation via the terminal went well.
When I try to configure the printer with the wizard, the printer is seen, but at the end, it asks me again to do the installation wizard.
Other times there is a communication error n. 5012.

How can I solve the problem?

Thanks and await answers.

And the winner is....



That's right. That evil empire will that everyone loves to hate, but uses anyway, will be the default web browser in Series 6x.

The contenders:

Firefox - now served up as a Snap package only... (need a vomit emoticon)
Brave - nice browser, but wants to block our ads, counter productive
Edge - too early, needs to mature. For Series 7x? Very possible.
Chromium - extremely close to being the default, but if you're gonna serve up a Chrome base, might as well have the full monty.
Vivaldi - nice browser, poor market share so a big learning curve for our users and we don't do big learning curves here.
Opera - see Vivaldi

Chrome - Established, everything you throw at it just works. I myself wish FF was still an option, but had to go with the browser that ticked the usual boxes for our target audience. Yes this will p#$s some people off, some will jump for joy. You can't win them all, you can only do what you think is best for the majority.

Market share globally - last 12 months

No brainer...

why Google Chrome needs password to open?

Congrats to the always helpful [member=9039]stevef[/member] on being appointed our newest Global Moderator

I receive updates daily to LL 5.8 and I would like to know is there an easy way to know what updates are important and are not. 

Vint