Just today, my LL software 4.6, will not allow any software from being downloaded. It worked yesterday. Now I get a "Failed" when trying to download any software such as Belena Etcher. I need to create a USB I.O to load Manjero.
No idea why all software downloads fail in a few seconds?
Please help.

My Dell Latitude E6220 Laptop takes too long to boot up—3.15 minutes, which I think is too long. I unchecked some and then all the applications from 'Session and Startup, ' but there is no difference in boot time, whatsoever.  I have no third-party software installed.

Any helpful suggestions or remedies, please   

-Processors-
Package Information
Intel® Core™ i5-2520M CPU @ 2.50GHz 0 0:0 3200.00 MHz
Intel® Core™ i5-2520M CPU @ 2.50GHz 1 0:1 3200.00 MHz
Intel® Core™ i5-2520M CPU @ 2.50GHz 2 0:0 3200.00 MHz
Intel® Core™ i5-2520M CPU @ 2.50GHz 3 0:1 3200.00 MHz

-Memory-
MemTotal Total Memory 3883788 KiB
MemFree Free Memory 496216 KiB
MemAvailable 1754864 KiB
Buffers 78876 KiB
Cached 1539512 KiB
SwapCached Cached Swap 0 KiB
Active 2074168 KiB
Inactive 806616 KiB
Active(anon) 1448912 KiB
Inactive(anon) 0 KiB
Active(file) 625256 KiB
Inactive(file) 806616 KiB
Unevictable 120616 KiB
Mlocked 20340 KiB
SwapTotal Virtual Memory 6060416 KiB
SwapFree Free Virtual Memory 6060416 KiB
Zswap 0 KiB
Zswapped 0 KiB
Dirty 316 KiB
Writeback 0 KiB
AnonPages 1383104 KiB
Mapped 490320 KiB
Shmem 176856 KiB
KReclaimable 60144 KiB
Slab 179108 KiB
SReclaimable 60144 KiB
SUnreclaim 118964 KiB
KernelStack 10696 KiB
PageTables 31968 KiB
SecPageTables 0 KiB
NFS_Unstable 0 KiB
Bounce 0 KiB
WritebackTmp 0 KiB
CommitLimit 8002308 KiB
Committed_AS 12772768 KiB
VmallocTotal -1 KiB
VmallocUsed 73352 KiB
VmallocChunk 0 KiB
Percpu 12352 KiB
HardwareCorrupted 0 KiB
AnonHugePages 0 KiB
ShmemHugePages 47104 KiB
ShmemPmdMapped 0 KiB
FileHugePages 0 KiB
FilePmdMapped 0 KiB
Unaccepted 0 KiB
HugePages_Total 0
HugePages_Free 0
HugePages_Rsvd 0
HugePages_Surp 0
Hugepagesize 2048 KiB
Hugetlb 0 KiB
DirectMap4k 202192 KiB
DirectMap2M 3870720 KiB

-PCI Devices-
Host bridge : Intel Corporation 2nd Generation Core Processor Family DRAM Controller (rev 09)
VGA compatible controller : Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller])
Communication controller : Intel Corporation 6 Series/C200 Series Chipset Family MEI Controller #1 (rev 04)
Ethernet controller : Intel Corporation 82579LM Gigabit Network Connection (Lewisville) (rev 04)
USB controller : Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #2 (rev 04) (prog-if 20 [EHCI])
Audio device : Intel Corporation 6 Series/C200 Series Chipset Family High Definition Audio Controller (rev 04)
PCI bridge : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 1 (rev b4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 2 (rev b4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 3 (rev b4) (prog-if 00 [Normal decode])
PCI bridge : Intel Corporation 6 Series/C200 Series Chipset Family PCI Express Root Port 6 (rev b4) (prog-if 00 [Normal decode])
USB controller : Intel Corporation 6 Series/C200 Series Chipset Family USB Enhanced Host Controller #1 (rev 04) (prog-if 20 [EHCI])
ISA bridge : Intel Corporation QM67 Express Chipset LPC Controller (rev 04)
RAID bus controller : Intel Corporation 82801 Mobile SATA Controller [RAID mode] (rev 04)
SMBus : Intel Corporation 6 Series/C200 Series Chipset Family SMBus Controller (rev 04)
Network controller : Broadcom Inc. and subsidiaries BCM4313 802.11bgn Wireless Network Adapter (rev 01)
SD Host controller : O2 Micro, Inc. OZ600FJ0/OZ900FJ0/OZ600FJS SD/MMC Card Reader Controller (rev 05) (prog-if 01)
Mass storage controller : O2 Micro, Inc. Device 8231 (rev 03)

Estou com problemas com o pulseaudio esta sem som.

One of the most requested features is now within reach, thanks largely to me working with LLM's.

I'm certainly no Python/GTK expert, but I am learning fast. The application when running uses 172mb of memory and the entire applications weighs in at 28kb!

A.I. is mind-blowing. I would like to eventually convert all existing Linux Lite applications to Python/GTK.

Currently testing with Series 6 to Series 7. Once that ticks all the boxes, will move onto testing with Series 7 to Series 8.

Really hoping to make this ready for deployment at the start of Series 8.

After a few hours of bug squashing, the first build was ready for a test drive.

Hello everyone! I'm new here and I'm glad to be here.
Im' using LL 6.6 but I want to see and test LL 7.6 in a virtual machine, but I can't install this in my PC.
Platform: LinuxLite 6.6 updated, Hp mini PC 400 G2 with 32 GB Ram, 1 TB NVMe and core i5 6500, VirtualBox 7.2.0, Vm with 2 cpu, 4 GB ram and 120 GB virtual disk.
I can't install, the last screen I got is the image, after this in the VM I can use terminal, some app but the installation freezes. I can install the 7.4 version without problems, same config of the latest version.
[attachment=275]
I need your help. What am I doing wrong? 
PS Please excuse me for my broken english...

Are there any known issues with LL7.4 and Chrome 139?
In the last week I have had an intermittent problem with the rendering of images displayed in Chrome.
If there are no known problems, how can I begin to track down the problem?

It told me to copy and paste....

Thank you in advance for any help on this.

============ Log ===========

Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following packages were automatically installed and are no longer required:
  libllvm19 linux-headers-6.8.0-59 linux-headers-6.8.0-59-generic
  linux-headers-6.8.0-60 linux-headers-6.8.0-60-generic linux-headers-6.8.0-62
  linux-headers-6.8.0-62-generic linux-headers-6.8.0-63
  linux-headers-6.8.0-63-generic linux-headers-6.8.0-64
  linux-headers-6.8.0-64-generic linux-image-6.8.0-59-generic
  linux-image-6.8.0-60-generic linux-image-6.8.0-62-generic
  linux-image-6.8.0-63-generic linux-image-6.8.0-64-generic
  linux-modules-6.8.0-59-generic linux-modules-6.8.0-60-generic
  linux-modules-6.8.0-62-generic linux-modules-6.8.0-63-generic
  linux-modules-6.8.0-64-generic linux-modules-extra-6.8.0-59-generic
  linux-modules-extra-6.8.0-60-generic linux-modules-extra-6.8.0-62-generic
  linux-modules-extra-6.8.0-63-generic linux-modules-extra-6.8.0-64-generic
  linux-tools-6.8.0-59 linux-tools-6.8.0-59-generic linux-tools-6.8.0-60
  linux-tools-6.8.0-60-generic linux-tools-6.8.0-62
  linux-tools-6.8.0-62-generic linux-tools-6.8.0-63
  linux-tools-6.8.0-63-generic linux-tools-6.8.0-64
  linux-tools-6.8.0-64-generic
Use 'apt autoremove' to remove them.
The following packages have been kept back:
  inxi zenity zenity-common
The following packages will be upgraded:
  linux-firmware
1 to upgrade, 0 to newly install, 0 to remove and 3 not to upgrade.
Need to get 537 MB of archives.
After this operation, 171 kB of additional disk space will be used.
Ign:1 http://us.archive.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
Ign:1 http://us.archive.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
Ign:1 http://us.archive.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
Ign:1 http://us.archive.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
Err:1 http://security.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
  500  Internal Server Error [IP: 91.189.91.83 80]
E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/m..._amd64.deb  500  Internal Server Error [IP: 91.189.91.83 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

Just did a fresh install, updates won't install see logs below

Reading package lists...
Building dependency tree...
Reading state information...
Calculating upgrade...
The following NEW packages will be installed:
  libllvm20
The following packages have been kept back:
  inxi zenity zenity-common
The following packages will be upgraded:
  google-chrome-stable libegl-mesa0 libgbm1 libgl1-mesa-dri libglx-mesa0
  libxatracker2 linux-firmware lite-upgrade-series7 mesa-libgallium
  mesa-va-drivers mesa-vdpau-drivers
11 upgraded, 1 newly installed, 0 to remove and 3 not upgraded.
Need to get 537 MB/701 MB of archives.
After this operation, 152 MB of additional disk space will be used.
Ign:1 http://us.archive.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
Ign:1 http://us.archive.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
Ign:1 http://us.archive.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
Ign:1 http://us.archive.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
Err:1 http://security.ubuntu.com/ubuntu noble-updates/main amd64 linux-firmware amd64 20240318.git3b128b60-0ubuntu2.17
  500  Internal Server Error [IP: 91.189.91.83 80]
E: Failed to fetch http://security.ubuntu.com/ubuntu/pool/m..._amd64.deb  500  Internal Server Error [IP: 91.189.91.83 80]
E: Unable to fetch some archives, maybe run apt-get update or try with --fix-missing?

===========================
Install Updates Error log
===========================
Install Updates could not successfully download and install available updates.
Go to https://www.868212.xyz/forums/ and paste the log below into a new or existing thread for assistance.

============ Log ===========

E: Could not get lock /var/lib/dpkg/lock-frontend. It is held by process 4550 (apt-get)
E: Unable to acquire the dpkg frontend lock (/var/lib/dpkg/lock-frontend), is another process using it?

This problem was solved by running a script when I had the updating problem with Lite 7.4.

I've once again, on two laptops, freshly installed Lite 7.6 and the problem has returned.
Running the same script I used before fails and I'm stuck.  Please, any help on this.

Attached Files

  llupdates.txt (Size: 1.81 KB / Downloads: 2)